T350/500 - (67-77)

In late 1967, building on their success with the T20, Suzuki introduced the T500/5 (Cobra in the US/Canada markets and Titan elsewhere) as a 1968 model.[2] This was a 500 cc twin-cylinder air-cooled bike with a five-speed transmission. It was able to do over 100 mph, durable, handled reasonably well, especially on motorways and sweeping bends and went on to be produced in the tens of thousands until the end of the 1977 model year. The "Cobra" model name was dropped at the end of the first year of production, apparently after Suzuki received a letter from the Ford Motor Company's legal department. Ford at that time had an agreement to market the Shelby Mustang "Cobra" automobile so they took offense at Suzuki's use of the name. From that time on, the T500 was known as the "Titan" in all markets until the 1976 model year.
In 1976, the Titan was given a facelift and gained a single disc front brake. The "Titan" name was dropped and the designation became, simply, GT500 for both the 1976 and 1977 model years. At the end of the 1977 model year, the 500 was dropped from Suzuki's model line after a production run of ten model years and well over 100,000 examples produced. In Australasia the T350 Rebel developed legendary status after the triumph of racer Joe Eastmure over much larger super bikes in both the 1972 and 1973 6 hour race at Amaroo, Australia. Although only 315 cc and having drum brakes, the bike was able to out race bikes with twice the engine capacity using the quick but stable handling of the bike, especially the ground clearance.
Needless to say, if one were looking to build a potent Cafe Racer for the street a T350 or T500 would make an excellent choice!
-
"Discrete" British Customs Brake & Clutch Fluid Reservoir - (Fits: Modern Triumph Twins & Nissin Controls)
$109.95 -
10mm x 1.25 Brake Banjo Bolt: 24mm Length
$7.95 -
10mm x 1.25 Brake Banjo Bolt: 24mm Long
$7.95 -
10mm x 1.25 Double Banjo Bolt: 33.5mm Length
$8.95
-
7/8" Universal Black Nissin "Shorty" Hydraulic Front Brake Master Cylinder
$139.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Aluminum, 14MM Piston)
$139.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 14mm Piston)
$130.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 5/8" Piston)
$130.00
-
Black 7/8" Universal Hydraulic Front Brake Master Cylinder - (Aluminum, 14mm Piston)
$109.95 -
Brake Speed Bleeder - (7mm)
$7.95 -
Brake Speed Bleeder - (8MM)
$7.95 -
Copper Banjo Crush Washers (10-Pack)
$6.95
-
Copper Banjo Crush Washers (20-Pack)
$10.95 -
Copper Brake Banjo Crush Washers (6-Pack)
$4.95 -
DIY TC Bros Universal Brake Control
$59.95 -
Galfer 12 Degree K7 Stainless Steel Banjo Fitting
$10.00
-
Galfer 40 Degree Short K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer 90 Degree K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer K7 Universal Stainless Steel Brake Lines
$0.00 -
Galfer Straight K7 Universal Threaded Brake Banjo Fitting
$10.00
-
Grey 7/8" Universal Hydraulic Front Brake Master Cylinder - (Aluminum, 14mm Piston)
$109.95 -
OE Brake Caliper Bleeder Cap
$2.95 -
Replacement Lever for 7/8" Universal Nissin Hydraulic Front Brake Master Cylinder
$44.95 -
Replacement Reservoir for Nissin Hydraulic Front Brake Master Cylinder
$28.95
-
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate & Silver, 1/2" Piston)
$189.00 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate & Silver, 5/8" Piston)
$189.00 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 1/2" Piston)
$170.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 14mm Piston)
$175.95
-
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 5/8" Piston)
$170.95 -
Snap Ring Pliers - (Master Cylinder)
$27.50 -
Stainless Steel Brake Speed Bleeder - (7mm)
$14.95 -
Stainless Steel Tie Wraps
$0.95






