GS550/650 - (77-84)

The Suzuki GS series is a line of motorcycles featuring air-cooled parallel-twin and Inline four engines with two or four valves per cylinder. The GS-range of models are considered to be examples of Universal Japanese motorcycles. The range of motorcycles in the series had engine displacements between 125 cc and 1100 cc, and include the GS400 and GS500. The GS series also include the original Katana series, although the 1100 had 16 valves, thus being a GSX. It was however still designated as a GS on some markets.
Whether you have a smaller GS400 all the way up to the 1000, you have a perfect candidate to strip away the exterior and build a Cafe Racer out of it!
-
"The Coveted" Mikuni VM32mm Carburetor, Left Side - (Pre-Jetted for: CB/CL450, CB500T & Other 400-650cc Twins)
$119.95 -
1/4" Black Fuel Line
$1.75 -
1/4" Clear Braided Fuel Line
$1.95 -
1/4" Dual Sided Fuel Line Quick Disconnect
$25.95
-
1/4" Fuel Line
$1.75 -
1/4" Fuel Line Clamps
$4.95 -
1/4" Red Polyurethane Fuel Line
$1.75 -
1/4" Stainless Steel Wrapped Fuel Line
$16.95
-
1/4" Translucent Blue Fuel Line
$1.75 -
1/4" Translucent Brass Fuel Line
$1.50 -
1/4" Translucent Red Fuel Line
$1.99 -
1/4" Translucent Yellow Fuel Line
$1.75
-
1/4" Translucent Yellow Fuel Line
$1.75 -
1/8" Clear Fuel/Vent Line
$1.75 -
1/8" Red Vent Line
$1.50 -
1/8" Translucent Brass Colored Vent Line
$1.50
-
1/8" Translucent Red Vent Line
$1.50 -
1/8" Translucent Vent Hose - (Blue)
$1.50 -
3/16" Fuel Line Clamps
$3.95 -
3/16" Translucent Yellow Fuel Line
$1.75
-
5/16" Clear Braided Fuel Line
$1.95 -
5/16" Dual-sided Fuel Line Quick Disconnect
$29.95 -
5/16" Fuel Line Clamps
$5.95 -
5/16" Translucent Brass Fuel Line
$1.50
-
5/16" Translucent Red Fuel Line
$1.95 -
5MM Brass Carburetor/Intake Vacuum Tuning Ports - (Set of 2)
$4.95 -
5MM Brass Carburetor/Intake Vacuum Tuning Ports - (Set of 4)
$9.00 -
6mm Carburetor Intake Vacuum Tuning Port
$18.95
-
7/16" Crimp-on Steel Fuel Line Clamps
$7.95 -
Brass Barrel/Nipple Cable Fitting 6 x 10mm for 1.5mm Cable - (Fits: Carburetor End)
$8.95 -
Carburetor Float Bowl Level Gauge
$49.95 -
Carburetor Pilot Screw Adjuster Tool
$29.95









