CB400F (75-77)

After introducing the four-cylinder CB750 motorcycle in 1969, Honda Motor Company followed with a string of lighter fours featuring engines as small as 350 cc (CB350 Four, CB500 Four), and the CB400F 408 cc Four, produced in two models from 1975 through 1977. For the most part, the CB400F was simply an upgraded version of the 350 model from the previous year. The most striking change was the swoopy four-into-one exhaust system that snaked around the frame, converging into a single muffler on the right side of the bike. Also noticeable were the angular fuel tank and flat Cafe-style handlebars, all of which gave the bike a more racer-like look and feel than the rather pedestrian 350.
Although aimed at the sporting segment of the market, the four-stroke CB400F did not have the acceleration of the competition's two-strokes, particularly the triples from Kawasaki. But what the CB400F engine lacked in power it made up for in refinement, the small-displacement four-stroke being smoother, quieter and much more economical than the two-strokes. To help keep the engine in its power band, Honda employed a six-speed transmission-something of a rarity at the time. The CB400F was a very successful motorcycle in club or privateer racing. Kaz Yoshima and other racers were able to take Honda's little 408cc engine up to 490cc, and with the addition of other modifications, this small bore was considered a 'giant killer'. Once again, Honda delivered a truly unique motorcycle with great Cafe Racer potential.
-
15 Tooth Front Sprocket - (Fits: CB250, CB/CL350T, CB350F, CB/CL360T, CB400F/T, CM400, CB450 & CB500T)
$19.95 -
16 Tooth Front Sprocket - (Fits: CB250, CB/CL350T, CB350F, CB/CL360T, CB400F/T, CM400, CB450 & CB500T)
$19.95 -
17 Tooth Front Sprocket - (Fits: CB250, CB/CL350T, CB350F, CB/CL360T, CB400F/T, CM400, CB450 & CB500T)
$19.95 -
18 Tooth Front Sprocket - (Fits: CB250, CB/CL350T, CB350F, CB/CL360T, CB400F/T, CM400, CB450 & CB500T)
$18.95
-
300 Piece E-Clip Assortment Pack
$12.95 -
34 Tooth Rear Sprocket - (Fits: CB250, CB/CL350T, CB350F, CB/CL360 & CB400F)
$37.95 -
36 Tooth Rear Sprocket - (Fits: CB250, CB/CL350T, CB350F, CB/CL360 & CB400F)
$37.95 -
38 Tooth Rear Sprocket - (Fits: CB250, CB/CL350T, CB350F, CB/CL360 & CB400F)
$37.95
-
Brass Pear/Nipple Cable Fitting for 2.5mm Wire - (Fits: Clutch Lower)
$4.50 -
Brass Pear/Nipple Cable Fitting for 2mm Wire - (Fits: Clutch Lower)
$4.50 -
Carburetor Rebuild Kit - (Fits: CB400F)
$23.95 -
CB350F / CB400F Tach Gear Box Oil Seal
$3.95
-
Complete Engine Gasket Set - (Fits: CB400F 75-77)
$52.95 -
D7EA NGK Standard Plug - (OE Honda Spec)
$2.95 -
D8EA NGK Standard Plug
$2.95 -
DPR8EA-9 NGK-R Plug
$2.95
-
EBC Clutch Kit - (Fits: CB350F 72-74 & CB400F 75-77)
$45.95 -
EBC Clutch Spring Kit - (Fits: CB350F, CB/CL360 69-73, CB400F 75-77 & CB750 76)
$8.95 -
Engine Oil Seal Kit - (Fits: CB400F)
$21.95 -
Engine Porting Kit
$90.95
-
Hand-held 6mm x 1.0 Fix-A-Thread Kit
$29.95 -
Honda Cylinder Head Sealing Rubbers - (Fits: Honda Fours)
$6.95 -
Ignition System Tester
$9.95 -
OEM Style Oil Filter for Honda and Kawasaki
$2.95
-
Polished Aluminum "400 Four" Points Cover - (Fits: CB400F)
$120.00 -
Polished Aluminum "Honda Wing" Points Cover - (Fits: CB350F, 400F, 500F & 550F)
$120.00 -
Polished Stainless Steel Allen Head Bolt Kit - (Fits: CB400F)
$39.95 -
Power Grip Valve Lapping Tool
$59.95








