CB500F (71-75)

The Honda CB500 four, introduced early in the 1970's, was similarly styled to the CB750, but smaller and lighter, with an output of 48bhp and a manufacturer's specified top speed of 102 mph. Like the earlier CB750, it sported a single front hydraulic disc brake, rear drum brake, electric starter, and single overhead camshaft (SOHC) 8 valve engine. The 4 into 4 exhaust pipes made it easy to identify. It was thought to be a better handling bike than the larger model, although it weighed in at 420lb (dry).
A number were raced in the Production TT races on the Isle of Man in the early 1970's. Bill Smith won the 1973 500cc TT Production race (4 laps) riding one, by only 8.2 seconds from second place Stan Woods mounted on a Suzuki T500 two stroke twin. With a proven track record like that and a reputation that precedes itself, it's a given that the CB500F is fantastic selection for one aspiring to cafe couture.
-
"Discrete" British Customs Brake & Clutch Fluid Reservoir - (Fits: Modern Triumph Twins & Nissin Controls)
$109.95 -
10mm x 1.25 Brake Banjo Bolt: 24mm Length
$7.95 -
10mm x 1.25 Brake Banjo Bolt: 24mm Long
$7.95 -
10mm x 1.25 Double Banjo Bolt: 33.5mm Length
$8.95
-
7/8" Universal Black Nissin "Shorty" Hydraulic Front Brake Master Cylinder
$139.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Aluminum, 14MM Piston)
$139.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 14mm Piston)
$130.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 5/8" Piston)
$130.00
-
Black 7/8" Universal Hydraulic Front Brake Master Cylinder - (Aluminum, 14mm Piston)
$109.95 -
Brake Speed Bleeder - (7mm)
$7.95 -
Brake Speed Bleeder - (8MM)
$7.95 -
Copper Banjo Crush Washers (10-Pack)
$6.95
-
Copper Banjo Crush Washers (20-Pack)
$10.95 -
Copper Brake Banjo Crush Washers (6-Pack)
$4.95 -
Galfer 12 Degree K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer 40 Degree Short K7 Stainless Steel Banjo Fitting
$10.00
-
Galfer 90 Degree K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer K7 Universal Stainless Steel Brake Lines
$0.00 -
Galfer Straight K7 Universal Threaded Brake Banjo Fitting
$10.00 -
Grey 7/8" Universal Hydraulic Front Brake Master Cylinder - (Aluminum, 14mm Piston)
$109.95
-
Honda CB/CL Brake Master Cylinder Diaphragm
$4.95 -
Honda CB/CL Brake Master Cylinder Lever Control Plate, OE# 45527-300-00
$4.95 -
Honda CB/CL Front Brake Master Cylinder Brake Lever Bushing, OE# 45526-341-000
$2.95 -
Honda CB/CL Front Brake Pads - (Fits: CB/CL350, CB350/400F, CB/CL450, CB500T, CB550F/T & CB750)
$34.95
-
Honda CB/CL Front Caliper Bolt
$4.95 -
Honda CB/CL Front Caliper Spring
$4.25 -
Honda CB/CL Rear Brake Rod Spring
$0.95 -
OE Brake Caliper Bleeder Cap
$2.95
-
OE Brake Caliper Bleeder For Honda CB/CL's
$9.95 -
OE CB/CL Lower Rubber Brake Hose
$51.95 -
OE CB/CL Lower Stainless Steel Brake Hose (12" Long)
$57.95 -
OE CB/CL Lower Stainless Steel Brake Hose - (13" Long)
$57.95
-
OE CB/CL Stainless Steel Brake Line with M10 Fitting(21")
$69.95 -
OE Honda Rear Brake Rod Adjuster Nut, OE# 43486-250-000
$1.95 -
OE Honda Rear Brake Rod Through-Stay, OE #95015-32001
$1.45 -
Replacement Lever for 7/8" Universal Nissin Hydraulic Front Brake Master Cylinder
$44.95
-
Replacement Reservoir for Nissin Hydraulic Front Brake Master Cylinder
$28.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate & Silver, 14mm Piston)
$189.00 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate & Silver, 5/8" Piston)
$189.00 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 1/2" Piston)
$170.95

