W800 - (08-Current)

The Kawasaki W800 is a motorcycle produced by Kawasaki since 2011. The W800 is a retro style model that emulates the Kawasaki W series, three models that were produced from 1967 to 1975, and which in turn were based on the British BSA A7. It replaced the W650, which was produced from 1999 to 2007. The W800 has an air-cooled, 773 cc (47 cu in) parallel-twin, four-stroke engine, with shaft and bevel gear driven overhead cam. The carburetor-fueled W650 was discontinued because it could not meet emissions regulations, so the W800 engine is fuel injected.
Unlike the W650, the W800 does not have a kickstart. The retro style includes a highly polished, gloss-painted and pinstriped fuel tank, as well as a ribbed saddle and wire wheels. If you're looking to build a modern Bobber aside from Triumphs Bonneville, this machine is your ticket!
-
"Discrete" British Customs Brake & Clutch Fluid Reservoir - (Fits: Modern Triumph Twins & Nissin Controls)
$109.95 -
10mm x 1.25 Brake Banjo Bolt: 24mm Length
$7.95 -
10mm x 1.25 Brake Banjo Bolt: 24mm Long
$7.95 -
10mm x 1.25 Double Banjo Bolt: 33.5mm Length
$8.95
-
7/8" Universal Black Nissin "Shorty" Hydraulic Front Brake Master Cylinder
$139.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Aluminum, 14MM Piston)
$139.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 14mm Piston)
$130.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 5/8" Piston)
$130.00
-
Brake Speed Bleeder - (7mm)
$7.95 -
Brake Speed Bleeder - (8MM)
$7.95 -
Copper Banjo Crush Washers (10-Pack)
$6.95 -
Copper Banjo Crush Washers (20-Pack)
$10.95
-
Copper Brake Banjo Crush Washers (6-Pack)
$4.95 -
DIY TC Bros Universal Brake Control
$59.95 -
Galfer 12 Degree K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer 40 Degree Short K7 Stainless Steel Banjo Fitting
$10.00
-
Galfer 90 Degree K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer K7 Universal Stainless Steel Brake Lines
$0.00 -
Galfer Straight K7 Universal Threaded Brake Banjo Fitting
$10.00 -
OE Brake Caliper Bleeder Cap
$2.95
-
Replacement Lever for 7/8" Universal Nissin Hydraulic Front Brake Master Cylinder
$44.95 -
Replacement Reservoir for Nissin Hydraulic Front Brake Master Cylinder
$28.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate & Silver, 1/2" Piston)
$189.00 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate & Silver, 5/8" Piston)
$189.00
-
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 1/2" Piston)
$170.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 14mm Piston)
$175.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 5/8" Piston)
$170.95 -
Snap Ring Pliers - (Master Cylinder)
$27.50







