KZ400/440 - (74-84)

The Kawasaki Z/KZ400 is a street motorcycle produced by Kawasaki between 1974 and 1984. It was developed into a larger brother, the Z/KZ440 where the stroke was lengthened to increase engine capacity. The "original" Kawasaki KZ400 was a 398 cc twin cylinder motorcycle produced from 1974 to 1984, though some later models displaced 440 cc. The KZ400 was built at plants in Akashi, Japan and Lincoln, Nebraska. The Lincoln plant (built in 1974) made Kawasaki the first foreign motorcycle manufacturer to operate a plant in the United States. The KZ400 outsold Honda in the 400 cc twins market through the 1970s. These motorcycles were marketed as fuel efficient transportation; a 1975 magazine advertisement for Kawasaki featured the KZ400 next to a Volkswagen Beetle with the tag line "Think even smaller."
Some models were offered as bare-bones transportation, with no electric start and front drum brakes. Most, however, had a single disc in the front and drum in the rear as well as electric and kick starters. Deluxe models also had a fairing and saddle bags. Combine all these options with the simplistic nature of the 400/440 and you've got a platform to build an amazing Cafe Racer!
-
"Discrete" British Customs Brake & Clutch Fluid Reservoir - (Fits: Modern Triumph Twins & Nissin Controls)
$109.95 -
10mm x 1.25 Brake Banjo Bolt: 24mm Length
$7.95 -
10mm x 1.25 Brake Banjo Bolt: 24mm Long
$7.95 -
10mm x 1.25 Double Banjo Bolt: 33.5mm Length
$8.95
-
7/8" Universal Black Nissin "Shorty" Hydraulic Front Brake Master Cylinder
$139.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Aluminum, 14MM Piston)
$139.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 14mm Piston)
$130.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 5/8" Piston)
$130.00
-
Black 7/8" Universal Hydraulic Front Brake Master Cylinder - (Aluminum, 14mm Piston)
$109.95 -
Brake Speed Bleeder - (7mm)
$7.95 -
Brake Speed Bleeder - (8MM)
$7.95 -
Copper Banjo Crush Washers (10-Pack)
$6.95
-
Copper Banjo Crush Washers (20-Pack)
$10.95 -
Copper Brake Banjo Crush Washers (6-Pack)
$4.95 -
Galfer 12 Degree K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer 40 Degree Short K7 Stainless Steel Banjo Fitting
$10.00
-
Galfer 90 Degree K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer K7 Universal Stainless Steel Brake Lines
$0.00 -
Galfer Straight K7 Universal Threaded Brake Banjo Fitting
$10.00 -
Grey 7/8" Universal Hydraulic Front Brake Master Cylinder - (Aluminum, 14mm Piston)
$109.95
-
Kawasaki Front Brake Pads - (Fits: KZ305, KZ440, KZ550, KZ650, KZ700, KZ750, KZ1000, & KZ1100)
$29.95 -
Kawasaki Full Sintered HH Front Brake Pads - (Fits: KZ305, KZ440, KZ550, KZ650, KZ700, KZ750, KZ1000, & KZ1100)
$34.95 -
Kawasaki Semi Sintered Front Brake Pads - (Fits: KZ305, KZ440, KZ550, KZ650, KZ700, KZ750, KZ1000, & KZ1100)
$32.95 -
OE Brake Caliper Bleeder Cap
$2.95
-
Replacement Lever for 7/8" Universal Nissin Hydraulic Front Brake Master Cylinder
$44.95 -
Replacement Reservoir for Nissin Hydraulic Front Brake Master Cylinder
$28.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate & Silver, 1/2" Piston)
$189.00 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate & Silver, 5/8" Piston)
$189.00
-
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 1/2" Piston)
$170.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 14mm Piston)
$175.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 5/8" Piston)
$170.95 -
Snap Ring Pliers - (Master Cylinder)
$27.50









