KZ750 - (76-83)

Introduced in 1976, the KZ750 was the odd-man-out in Kawasaki’s lineup, especially considering the new bikes Kawasaki had planned for 1977, which included the 4-cylinder KZ650 and KZ1000. Matched up against those two machines and the carry-over KZ900 four, the 750 didn’t quite make sense. With its legendary 2-stroke triples a thing of the past, Kawasaki’s performance machines were being defined by four cylinders. So why a big twin?
Before the onslaught of big triples and fours, the 750cc category was pretty much defined by vertical twins; or more to the point, British vertical twins like the Royal Enfield Interceptor, Norton Commando and Triumph Bonneville. Yamaha made some motion into the category with the Yamaha XS650 vertical twin in 1970, and even more so with the Yamaha TX750 three years later. But compared to its British rivals the XS650 was considered small, while the TX750 was a regrettable failure. By the end of 1975, there were really only two large vertical twins on the market, the 750cc Triumph Bonneville and the 650cc Yamaha XS650.
That said, if your looking for a big bore twin that rivals a Bonnie or W800, the KZ750 is your mark to hit for building a Cafe Racer of the metric variety!
-
"Discrete" British Customs Brake & Clutch Fluid Reservoir - (Fits: Modern Triumph Twins & Nissin Controls)
$109.95 -
10mm x 1.25 Brake Banjo Bolt: 24mm Length
$7.95 -
10mm x 1.25 Brake Banjo Bolt: 24mm Long
$7.95 -
10mm x 1.25 Double Banjo Bolt: 33.5mm Length
$8.95
-
7/8" Universal Black Nissin "Shorty" Hydraulic Front Brake Master Cylinder
$139.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Aluminum, 14MM Piston)
$139.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 14mm Piston)
$130.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 5/8" Piston)
$130.00
-
Black 7/8" Universal Hydraulic Front Brake Master Cylinder - (Aluminum, 14mm Piston)
$109.95 -
Brake Speed Bleeder - (7mm)
$7.95 -
Brake Speed Bleeder - (8MM)
$7.95 -
Copper Banjo Crush Washers (10-Pack)
$6.95
-
Copper Banjo Crush Washers (20-Pack)
$10.95 -
Copper Brake Banjo Crush Washers (6-Pack)
$4.95 -
Galfer 12 Degree K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer 40 Degree Short K7 Stainless Steel Banjo Fitting
$10.00
-
Galfer 90 Degree K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer K7 Universal Stainless Steel Brake Lines
$0.00 -
Galfer Straight K7 Universal Threaded Brake Banjo Fitting
$10.00 -
Grey 7/8" Universal Hydraulic Front Brake Master Cylinder - (Aluminum, 14mm Piston)
$109.95
-
Kawasaki Front Brake Pads - (Fits: KH500, KZ650, KZ750, KZ900, & KZ1000)
$31.95 -
Kawasaki Front Brake Pads - (Fits: KZ305, KZ440, KZ550, KZ650, KZ700, KZ750, KZ1000, & KZ1100)
$29.95 -
Kawasaki Full Sintered HH Front Brake Pads - (Fits: KZ305, KZ440, KZ550, KZ650, KZ700, KZ750, KZ1000, & KZ1100)
$34.95 -
Kawasaki Semi Sintered Front Brake Pads - (Fits: KZ305, KZ440, KZ550, KZ650, KZ700, KZ750, KZ1000, & KZ1100)
$32.95
-
OE Brake Caliper Bleeder Cap
$2.95 -
Replacement Lever for 7/8" Universal Nissin Hydraulic Front Brake Master Cylinder
$44.95 -
Replacement Reservoir for Nissin Hydraulic Front Brake Master Cylinder
$28.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate & Silver, 1/2" Piston)
$189.00
-
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate & Silver, 5/8" Piston)
$189.00 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 1/2" Piston)
$170.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 14mm Piston)
$175.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 5/8" Piston)
$170.95









