W800 - (08-Current)

The Kawasaki W800 is a motorcycle produced by Kawasaki since 2011. The W800 is a retro style model that emulates the Kawasaki W series, three models that were produced from 1967 to 1975, and which in turn were based on the British BSA A7. It replaced the W650, which was produced from 1999 to 2007. The W800 has an air-cooled, 773 cc (47 cu in) parallel-twin, four-stroke engine, with shaft and bevel gear driven overhead cam. The carburetor-fueled W650 was discontinued because it could not meet emissions regulations, so the W800 engine is fuel injected.
Unlike the W650, the W800 does not have a kickstart. The retro style includes a highly polished, gloss-painted and pinstriped fuel tank, as well as a ribbed saddle and wire wheels. If you're looking to build a modern Cafe Racer aside from Triumphs Bonneville, this machine is your ticket!
-
1/4" Black Fuel Line
$1.75 -
1/4" Clear Braided Fuel Line
$1.95 -
1/4" Dual Sided Fuel Line Quick Disconnect
$25.95 -
1/4" Fuel Line
$1.75
-
1/4" Fuel Line Clamps
$4.95 -
1/4" Red Polyurethane Fuel Line
$1.75 -
1/4" Stainless Steel Wrapped Fuel Line
$16.95 -
1/4" Translucent Blue Fuel Line
$1.75
-
1/4" Translucent Brass Fuel Line
$1.50 -
1/4" Translucent Red Fuel Line
$1.99 -
1/4" Translucent Yellow Fuel Line
$1.75 -
1/4" Translucent Yellow Fuel Line
$1.75
-
1/8" Clear Fuel/Vent Line
$1.75 -
1/8" Red Vent Line
$1.50 -
1/8" Translucent Brass Colored Vent Line
$1.50 -
1/8" Translucent Red Vent Line
$1.50
-
1/8" Translucent Vent Hose - (Blue)
$1.50 -
3/16" Fuel Line Clamps
$3.95 -
3/16" Translucent Yellow Fuel Line
$1.75 -
5/16" Clear Braided Fuel Line
$1.95
-
5/16" Dual-sided Fuel Line Quick Disconnect
$29.95 -
5/16" Fuel Line Clamps
$5.95 -
5/16" Translucent Brass Fuel Line
$1.50 -
5/16" Translucent Red Fuel Line
$1.95
-
5MM Brass Carburetor/Intake Vacuum Tuning Ports - (Set of 2)
$4.95 -
5MM Brass Carburetor/Intake Vacuum Tuning Ports - (Set of 4)
$9.00 -
6DH2 Jet Needle - (Fits: Mikuni VM Carburetors)
$4.95 -
6F4 Jet Needle - (Fits: Mikuni VM Carburetors)
$4.95
-
6mm Carburetor Intake Vacuum Tuning Port
$18.95 -
7/16" Crimp-on Steel Fuel Line Clamps
$7.95 -
Brass Barrel/Nipple Cable Fitting 6 x 10mm for 1.5mm Cable - (Fits: Carburetor End)
$8.95 -
Brass Carb End Throttle Nipple for 1.5mm Cable - (Fits: Carburetor End)
$3.50









