Thruxton - (04-Current)

The Triumph Thruxton 900 is a British motorcycle made by Triumph Motorcycles. Launched in 2004, it was named after Thruxton racing circuit where Triumph won the first three places in the Thruxton 500 mile endurance race in 1969, establishing the "cafe racer" era where standard production motorcycles were modified to improve racing performance.
Triumph's designers had developed the successful Triumph Bonneville, adding clip-on handlebars and rear set controls, with a small fly-screen, a cowl for the rear seat and 'Megaphone' silencers. Instruments were faced in white and a checkered stripe completed the "café racer" look. Beginning in 2007 a new solid color stripe was used, featuring a broad centre stripe flanked by two thin stripes.
The engine was also upgraded with new cams and pistons increased by 90 mm, taking capacity to 865 cc and power up to 70 bhp (52 kW). Unlike the original Thruxton the new version is based on, which boasted top speeds over 140 mph (230 km/h), the new Thruxton tops out at 120 mph (190 km/h). Combine those specifications with Triumphs heritage and it's the obvious choice for a modern day Cafe Racer!
-
"Discrete" British Customs Brake & Clutch Fluid Reservoir - (Fits: Modern Triumph Twins & Nissin Controls)
$109.95 -
10mm x 1.25 Brake Banjo Bolt: 24mm Length
$7.95 -
10mm x 1.25 Brake Banjo Bolt: 24mm Long
$7.95 -
10mm x 1.25 Double Banjo Bolt: 33.5mm Length
$8.95
-
7/8" Universal Black Nissin "Shorty" Hydraulic Front Brake Master Cylinder
$139.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Aluminum, 14MM Piston)
$139.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 14mm Piston)
$130.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 5/8" Piston)
$130.00
-
Black 7/8" Universal Hydraulic Front Brake Master Cylinder - (Aluminum, 14mm Piston)
$109.95 -
Brake Speed Bleeder - (8MM)
$7.95 -
Copper Banjo Crush Washers (10-Pack)
$6.95 -
Copper Banjo Crush Washers (20-Pack)
$10.95
-
Copper Brake Banjo Crush Washers (6-Pack)
$4.95 -
DIY TC Bros Universal Brake Control
$59.95 -
Front Floating EBC Rotor - (Fits: Modern Triumph America, Bonneville, Scrambler & Speedmaster)
$255.00 -
Front Floating EBC Rotor - (Fits: Modern Triumph Thruxton)
$225.00
-
Front Floating EBC Rotor - (Fits: Triumph Bonneville Mag Wheel)
$155.00 -
Front Solid EBC Rotor - (Fits: Modern Triumph Twins)
$155.00 -
Galfer "Shortened" Stainless Steel Front Brake Kit - (Fits: Modern Triumph Bonneville, Thruxton & Scrambler w/ Clip-ons & Low Bars)
$61.95 -
Galfer "Standard Length" Stainless Steel Front Brake Kit - (Fits: Modern Triumph Bonneville, Thruxton & Scrambler w/ Standard Bars)
$65.95
-
Galfer 12 Degree K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer 40 Degree Short K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer 90 Degree K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer K7 Universal Stainless Steel Brake Lines
$0.00
-
Galfer Stainless Steel Rear "Main Line" Brake Kit - (Fits: Modern Triumph Bonneville, Thruxton & Scrambler)
$56.95 -
Galfer Stainless Steel Rear "Short Line" Brake Kit - (Fits: Modern Triumph Thruxton)
$52.95 -
Galfer Straight K7 Universal Threaded Brake Banjo Fitting
$10.00 -
Grey 7/8" Universal Hydraulic Front Brake Master Cylinder - (Aluminum, 14mm Piston)
$109.95
-
OE Brake Caliper Bleeder Cap
$2.95 -
Rear EBC Double-H Sintered Brake Pads - (Fits: Modern Triumph Twins)
$31.95 -
Rear EBC Rotor - (Fits: Modern Triumph Twins)
$157.00 -
Replacement Lever for 7/8" Universal Nissin Hydraulic Front Brake Master Cylinder
$44.95
-
Replacement Reservoir for Nissin Hydraulic Front Brake Master Cylinder
$28.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate & Silver, 1/2" Piston)
$189.00 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate & Silver, 5/8" Piston)
$189.00 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 1/2" Piston)
$170.95





