Scrambler - (06-Current)

The Triumph Scrambler is a British motorcycle made by Triumph Motorcycles. Launched in 2006, it was the last Triumph styled by designer John Mockett, who had begun working with the small factory team at Triumph in 1989, rationalising existing models based on a very successful modular design plan, including the concept and styling of the unfaired Trident triples for their 1990 IFMA launch. Mockett subsequently served as principal stylist for most of the bikes introduced up to 2006.
These included the Tiger, the Thunderbird and Thunderbird Sport, the Trophy (with its innovative luggage system), the Sprint, the T595/955 Daytona (including the frame), and he was responsible for the concept and styling of the Speed Triple and Rocket Three, as well as for the aborted four-cylinder 1,300 cc ultrasport. Then, with David Stride, Mockett drew up the new Bonnneville, the Bonneville America, the Thruxton and finally the Scrambler.
-
"Discrete" British Customs Brake & Clutch Fluid Reservoir - (Fits: Modern Triumph Twins & Nissin Controls)
$109.95 -
10mm x 1.25 Brake Banjo Bolt: 24mm Length
$7.95 -
10mm x 1.25 Brake Banjo Bolt: 24mm Long
$7.95 -
10mm x 1.25 Double Banjo Bolt: 33.5mm Length
$8.95
-
7/8" Universal Black Nissin "Shorty" Hydraulic Front Brake Master Cylinder
$139.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Aluminum, 14MM Piston)
$139.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 14mm Piston)
$130.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 5/8" Piston)
$130.00
-
Black 7/8" Universal Hydraulic Front Brake Master Cylinder - (Aluminum, 14mm Piston)
$109.95 -
Brake Speed Bleeder - (8MM)
$7.95 -
Copper Banjo Crush Washers (10-Pack)
$6.95 -
Copper Banjo Crush Washers (20-Pack)
$10.95
-
Copper Brake Banjo Crush Washers (6-Pack)
$4.95 -
DIY TC Bros Universal Brake Control
$59.95 -
Front EBC Double-H Sintered Brake Pads - (Fits: Modern Triumph Twins)
$31.95 -
Front Floating EBC Rotor - (Fits: Modern Triumph America, Bonneville, Scrambler & Speedmaster)
$255.00
-
Front Floating EBC Rotor - (Fits: Modern Triumph Thruxton)
$225.00 -
Front Floating EBC Rotor - (Fits: Triumph Bonneville Mag Wheel)
$155.00 -
Front Solid EBC Rotor - (Fits: Modern Triumph Twins)
$155.00 -
Galfer "Shortened" Stainless Steel Front Brake Kit - (Fits: Modern Triumph Bonneville, Thruxton & Scrambler w/ Clip-ons & Low Bars)
$61.95
-
Galfer "Standard Length" Stainless Steel Front Brake Kit - (Fits: Modern Triumph Bonneville, Thruxton & Scrambler w/ Standard Bars)
$65.95 -
Galfer 12 Degree K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer 40 Degree Short K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer 90 Degree K7 Stainless Steel Banjo Fitting
$10.00
-
Galfer K7 Universal Stainless Steel Brake Lines
$0.00 -
Galfer Stainless Steel Rear "Main Line" Brake Kit - (Fits: Modern Triumph Bonneville, Thruxton & Scrambler)
$56.95 -
Galfer Stainless Steel Rear "Short Line" Brake Kit - (Fits: Modern Triumph Thruxton)
$52.95 -
Galfer Straight K7 Universal Threaded Brake Banjo Fitting
$10.00
-
Grey 7/8" Universal Hydraulic Front Brake Master Cylinder - (Aluminum, 14mm Piston)
$109.95 -
OE Brake Caliper Bleeder Cap
$2.95 -
Rear EBC Double-H Sintered Brake Pads - (Fits: Modern Triumph Twins)
$31.95 -
Rear EBC Rotor - (Fits: Modern Triumph Twins)
$157.00
-
Replacement Lever for 7/8" Universal Nissin Hydraulic Front Brake Master Cylinder
$44.95 -
Replacement Reservoir for Nissin Hydraulic Front Brake Master Cylinder
$28.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate & Silver, 1/2" Piston)
$189.00 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate & Silver, 5/8" Piston)
$189.00
-
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 1/2" Piston)
$170.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 14mm Piston)
$175.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 5/8" Piston)
$170.95 -
Snap Ring Pliers - (Master Cylinder)
$27.50

