Bonneville T140 - (73-83)

The early 650 cc capacity production T120 Bonneville, often known as the duplex frame model, was replaced in the early 1970s by the T140 Bonneville, the same basic machine but with a 750 cc engine. Refined from the later 'oil in frame' version of the T120, the first few T140s, designated T140V, featured a larger-capacity engine of 724 cc, a five-speed gearbox option and indicators, but still retaining drum brakes and kick-start. Shortly after, the engine was further bored out to 744 cc and front disc brakes were fitted using single discs until 1982. In 1975, along with engine modifications, the gear-change lever was moved from right to left to comply with new regulations mandated for the American market and a rear disc brake fitted. Several T140 models followed featuring various modifications and refinements including electric starting from 1980 until production ceased with the closure of the Meriden works in 1983.
Although this should have been the end of the Bonneville, as it turned out it was not. Triumph Motorcycles was acquired by businessman John Bloor, who licensed a company called Racing Spares in Devon, run by Les Harris to manufacture the T140 Bonneville. These continuation bikes are known as the 'Devon Bonnevilles', which did not reach the market until 1985, and were not sold in the U.S. Production ended in 1988. As rare as a T140 might be, there is no denying their heritage and place as Cafe Racers.
-
"Discrete" British Customs Brake & Clutch Fluid Reservoir - (Fits: Modern Triumph Twins & Nissin Controls)
$109.95 -
10mm x 1.25 Brake Banjo Bolt: 24mm Length
$7.95 -
10mm x 1.25 Brake Banjo Bolt: 24mm Long
$7.95 -
10mm x 1.25 Double Banjo Bolt: 33.5mm Length
$8.95
-
7/8" Universal Black Nissin "Shorty" Hydraulic Front Brake Master Cylinder
$139.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Aluminum, 14MM Piston)
$139.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 14mm Piston)
$130.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 5/8" Piston)
$130.00
-
Black 7/8" Universal Hydraulic Front Brake Master Cylinder - (Aluminum, 14mm Piston)
$109.95 -
Brake Speed Bleeder - (7mm)
$7.95 -
Brake Speed Bleeder - (8MM)
$7.95 -
Copper Banjo Crush Washers (10-Pack)
$6.95
-
Copper Banjo Crush Washers (20-Pack)
$10.95 -
Copper Brake Banjo Crush Washers (6-Pack)
$4.95 -
Galfer 12 Degree K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer 40 Degree Short K7 Stainless Steel Banjo Fitting
$10.00
-
Galfer 90 Degree K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer K7 Universal Stainless Steel Brake Lines
$0.00 -
Galfer Straight K7 Universal Threaded Brake Banjo Fitting
$10.00 -
Grey 7/8" Universal Hydraulic Front Brake Master Cylinder - (Aluminum, 14mm Piston)
$109.95
-
OE Brake Caliper Bleeder Cap
$2.95 -
Replacement Lever for 7/8" Universal Nissin Hydraulic Front Brake Master Cylinder
$44.95 -
Replacement Reservoir for Nissin Hydraulic Front Brake Master Cylinder
$28.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate & Silver, 1/2" Piston)
$189.00
-
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate & Silver, 5/8" Piston)
$189.00 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 1/2" Piston)
$170.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 14mm Piston)
$175.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 5/8" Piston)
$170.95








