XS400 - (77-82)

The XS400 shared almost every aspect of build with it's smaller brothers, the XS250 & 360. It was equipped with a 6-speed transmission, Wet plate, 6 friction disk clutch, chain drive, tachometer, self-canceling turn signals, both electric and kick starters, adjustable rear shock absorbers, center stand, and an automatic fuel petcock. Early and economy models came with spoked wheels and drum brakes, while later and upgraded models received cast alloy wheels and hydraulic disc brakes. Later models also upgraded the early mechanical points ignition system to a modern solid state electronic system.
As is customary, the number in the model name indicates the engine displacement. Aside from displacement, the 250cc, 360cc, and 400cc variants were mostly identical except for some economy-minded XS250s and XS360s which omitted the electric starter and self-canceling turn signals. The upgraded Special, Maxim, and Heritage trim levels included styling changes such as stepped seats, megaphone-style exhaust pipes, and swept-back handlebars. No matter which year make or model XS you have, it's the perfect candidate for a Bobber, Brat or Chopper!
-
"Discrete" British Customs Brake & Clutch Fluid Reservoir - (Fits: Modern Triumph Twins & Nissin Controls)
$109.95 -
10mm x 1.25 Brake Banjo Bolt: 24mm Length
$7.95 -
10mm x 1.25 Brake Banjo Bolt: 24mm Long
$7.95 -
10mm x 1.25 Double Banjo Bolt: 33.5mm Length
$8.95
-
7/8" Universal Black Nissin "Shorty" Hydraulic Front Brake Master Cylinder
$139.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Aluminum, 14MM Piston)
$139.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 14mm Piston)
$130.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 5/8" Piston)
$130.00
-
Black 7/8" Universal Hydraulic Front Brake Master Cylinder - (Aluminum, 14mm Piston)
$109.95 -
Brake Speed Bleeder - (7mm)
$7.95 -
Brake Speed Bleeder - (8MM)
$7.95 -
Copper Banjo Crush Washers (10-Pack)
$6.95
-
Copper Banjo Crush Washers (20-Pack)
$10.95 -
Copper Brake Banjo Crush Washers (6-Pack)
$4.95 -
DIY TC Bros Universal Brake Control
$59.95 -
Front Brake Pads - (Fits: XT600, RZ350, XJ650L, XJ750, XS400, XV250, XV500, & XZ550R)
$31.95
-
Galfer 12 Degree K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer 40 Degree Short K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer 90 Degree K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer K7 Universal Stainless Steel Brake Lines
$0.00
-
Galfer Straight K7 Universal Threaded Brake Banjo Fitting
$10.00 -
Grey 7/8" Universal Hydraulic Front Brake Master Cylinder - (Aluminum, 14mm Piston)
$109.95 -
OE Brake Caliper Bleeder Cap
$2.95 -
Replacement Lever for 7/8" Universal Nissin Hydraulic Front Brake Master Cylinder
$44.95
-
Replacement Reservoir for Nissin Hydraulic Front Brake Master Cylinder
$28.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate & Silver, 1/2" Piston)
$189.00 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate & Silver, 5/8" Piston)
$189.00 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 1/2" Piston)
$170.95
-
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 14mm Piston)
$175.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 5/8" Piston)
$170.95 -
Snap Ring Pliers - (Master Cylinder)
$27.50 -
Stainless Steel Brake Speed Bleeder - (7mm)
$14.95







