SR400/500 - (78 - Current)

The Yamaha SR500 is a popular thumper. It first started production in 1978, as a road-going version of the popular Yamaha XT500. It experienced good sales throughout the US, Europe and Australia. The SR500 is no longer sold in any market worldwide, but its sister bike, the SR400, was manufactured in Japan until 2008 when emissions restrictions halted production. In 2010 Yamaha is reintroducing the SR400 with a fuel injection system replacing the carburetor. The SR400 is essentially the same bike as the SR500, but with a shorter stroke and heavier muffler to pass tighter emission restrictions.
The SR500 was well received on conception, largely due to its contemporary styling and reliable Yamaha single-cylinder 500 cc power-plant. The chassis and engine has served as a popular basis for many café racers, street trackers and even bobbers. SR500's are raced competitively in historic class across the world.
-
1/4" Black Fuel Line
$1.75 -
1/4" Clear Braided Fuel Line
$1.95 -
1/4" Dual Sided Fuel Line Quick Disconnect
$25.95 -
1/4" Fuel Line
$1.75
-
1/4" Fuel Line Clamps
$4.95 -
1/4" Stainless Steel Wrapped Fuel Line
$16.95 -
1/4" Translucent Blue Fuel Line
$1.75 -
1/4" Translucent Brass Fuel Line
$1.50
-
1/4" Translucent Red Fuel Line
$1.99 -
1/4" Translucent Yellow Fuel Line
$1.75 -
1/4" Translucent Yellow Fuel Line
$1.75 -
1/8" Clear Fuel/Vent Line
$1.75
-
1/8" Red Vent Line
$1.50 -
1/8" Translucent Brass Colored Vent Line
$1.50 -
1/8" Translucent Red Vent Line
$1.50 -
1/8" Translucent Vent Hose - (Blue)
$1.50
-
3/16" Fuel Line Clamps
$3.95 -
3/16" Translucent Yellow Fuel Line
$1.75 -
5/16" Clear Braided Fuel Line
$1.95 -
5/16" Dual-sided Fuel Line Quick Disconnect
$29.95
-
5/16" Fuel Line Clamps
$5.95 -
5/16" Translucent Brass Fuel Line
$1.50 -
5/16" Translucent Red Fuel Line
$1.95 -
5MM Brass Carburetor/Intake Vacuum Tuning Ports - (Set of 2)
$4.95
-
5MM Brass Carburetor/Intake Vacuum Tuning Ports - (Set of 4)
$9.00 -
6mm Carburetor Intake Vacuum Tuning Port
$18.95 -
7/16" Crimp-on Steel Fuel Line Clamps
$7.95 -
Brass Barrel/Nipple Cable Fitting 6 x 10mm for 1.5mm Cable - (Fits: Carburetor End)
$8.95
-
Brass Carb End Throttle Nipple for 1.5mm Cable - (Fits: Carburetor End)
$3.50 -
Carburetor Float Bowl Level Gauge
$49.95 -
Carburetor Pilot Screw Adjuster Tool
$29.95 -
Carburetor Vacuum Gauge Sync Kit - (Twin)
$45.00









