XS750/850 (76-81)

The Yamaha XS 750's and 850's were produced by the Yamaha Motor Corporation from 1976 to 1981 for the worldwide motorcycle market. The last model year of manufacturing was 1981.
These bikes are usually referred to as "Triples" because they have 3 cylinders. The first 4 model years the bike displaced 750cc. This was increased to 850cc for the final 2 model years. There were various changes made to the model over the years. When you combine the history of the XS line's engineering with the potent tripple cylinder engine it makes for a very fast and sleek Bobber.
-
1/4" Black Fuel Line
$1.75 -
1/4" Clear Braided Fuel Line
$1.95 -
1/4" Dual Sided Fuel Line Quick Disconnect
$25.95 -
1/4" Fuel Line
$1.75
-
1/4" Fuel Line Clamps
$4.95 -
1/4" Stainless Steel Wrapped Fuel Line
$16.95 -
1/4" Translucent Blue Fuel Line
$1.75 -
1/4" Translucent Brass Fuel Line
$1.50
-
1/4" Translucent Red Fuel Line
$1.99 -
1/4" Translucent Yellow Fuel Line
$1.75 -
1/4" Translucent Yellow Fuel Line
$1.75 -
1/8" Clear Fuel/Vent Line
$1.75
-
1/8" Red Vent Line
$1.50 -
1/8" Translucent Brass Colored Vent Line
$1.50 -
1/8" Translucent Red Vent Line
$1.50 -
1/8" Translucent Vent Hose - (Blue)
$1.50
-
3/16" Fuel Line Clamps
$3.95 -
3/16" Translucent Yellow Fuel Line
$1.75 -
5/16" Clear Braided Fuel Line
$1.95 -
5/16" Dual-sided Fuel Line Quick Disconnect
$29.95
-
5/16" Fuel Line Clamps
$5.95 -
5/16" Translucent Brass Fuel Line
$1.50 -
5/16" Translucent Red Fuel Line
$1.95 -
5MM Brass Carburetor/Intake Vacuum Tuning Ports - (Set of 2)
$4.95
-
5MM Brass Carburetor/Intake Vacuum Tuning Ports - (Set of 4)
$9.00 -
6mm Carburetor Intake Vacuum Tuning Port
$18.95 -
7/16" Crimp-on Steel Fuel Line Clamps
$7.95 -
Brass Barrel/Nipple Cable Fitting 6 x 10mm for 1.5mm Cable - (Fits: Carburetor End)
$8.95
-
Brass Carb End Throttle Nipple for 1.5mm Cable - (Fits: Carburetor End)
$3.50 -
Carburetor Float Bowl Level Gauge
$49.95 -
Carburetor Pilot Screw Adjuster Tool
$29.95 -
Carburetor Vacuum Gauge Sync Kit - (Twin)
$45.00









