SR400/500 - (78 - Current)

The Yamaha SR500 is a popular thumper. It first started production in 1978, as a road-going version of the popular Yamaha XT500. It experienced good sales throughout the US, Europe and Australia. The SR500 is no longer sold in any market worldwide, but its sister bike, the SR400, was manufactured in Japan until 2008 when emissions restrictions halted production. In 2010 Yamaha is reintroducing the SR400 with a fuel injection system replacing the carburetor. The SR400 is essentially the same bike as the SR500, but with a shorter stroke and heavier muffler to pass tighter emission restrictions.
The SR500 was well received on conception, largely due to its contemporary styling and reliable Yamaha single-cylinder 500 cc power-plant. The chassis and engine has served as a popular basis for many café racers, street trackers and even bobbers. SR500's are raced competitively in historic class across the world.
-
"Discrete" British Customs Brake & Clutch Fluid Reservoir - (Fits: Modern Triumph Twins & Nissin Controls)
$109.95 -
10mm x 1.25 Brake Banjo Bolt: 24mm Length
$7.95 -
10mm x 1.25 Brake Banjo Bolt: 24mm Long
$7.95 -
10mm x 1.25 Double Banjo Bolt: 33.5mm Length
$8.95
-
7/8" Universal Black Nissin "Shorty" Hydraulic Front Brake Master Cylinder
$139.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Aluminum, 14MM Piston)
$139.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 14mm Piston)
$130.00 -
7/8" Universal Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 5/8" Piston)
$130.00
-
Black 7/8" Universal Hydraulic Front Brake Master Cylinder - (Aluminum, 14mm Piston)
$109.95 -
Brake Speed Bleeder - (7mm)
$7.95 -
Brake Speed Bleeder - (8MM)
$7.95 -
Copper Banjo Crush Washers (10-Pack)
$6.95
-
Copper Banjo Crush Washers (20-Pack)
$10.95 -
Copper Brake Banjo Crush Washers (6-Pack)
$4.95 -
Front Brake Pads - (Fits: SR500, XS500, XS650, XS750, XS850, XV920, XS1100)
$29.95 -
Galfer 12 Degree K7 Stainless Steel Banjo Fitting
$10.00
-
Galfer 40 Degree Short K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer 90 Degree K7 Stainless Steel Banjo Fitting
$10.00 -
Galfer K7 Universal Stainless Steel Brake Lines
$0.00 -
Galfer Straight K7 Universal Threaded Brake Banjo Fitting
$10.00
-
Grey 7/8" Universal Hydraulic Front Brake Master Cylinder - (Aluminum, 14mm Piston)
$109.95 -
OE Brake Caliper Bleeder Cap
$2.95 -
Replacement Lever for 7/8" Universal Nissin Hydraulic Front Brake Master Cylinder
$44.95 -
Replacement Reservoir for Nissin Hydraulic Front Brake Master Cylinder
$28.95
-
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate & Silver, 1/2" Piston)
$189.00 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate & Silver, 5/8" Piston)
$189.00 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 1/2" Piston)
$170.95 -
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 14mm Piston)
$175.95
-
Retro 7/8" Nissin Hydraulic Front Brake Master Cylinder - (Black Electroplate, 5/8" Piston)
$170.95 -
Semi Sintered Front Brake Pads - (Fits: SR500, XS500, XS650, XS750, XS850, XV920, XS1100)
$32.95 -
Snap Ring Pliers - (Master Cylinder)
$27.50 -
Stainless Steel Brake Speed Bleeder - (7mm)
$14.95







