Free Shipping - US orders over $100. Canada over $199. See details.

6-1/4" Gloss Black H4 Headlight Assembly

6-1/4" Gloss Black H4 Headlight Assembly

Quick Overview

Color/Finish: Gloss Black Powder Coat

Material: Steel

Dimensions: 6-1/4" OD

Measures 6-1/2"€ Between Fork Ears

Mounting Holes: M10 x 1.25

Fits: Universal

Bulb Type: H4 60/55w

*Shipped as pictured with lens and bulb

$49.95
OR
-OR-

Description

Going for that murdered-out look on your Cafe or Bobber? Then you should definitely checkout this slightly smaller than stock headlamp assembly. A gloss black powder coat finished combined with an H4 bulb for high intensity lighting make it a perfect retro modern addition to your motorcycle.

Technical Details

SKU 66-64313
Brand DCC Originals
Color Black
Finish Gloss
Headlight Ring Color Chrome
Material Steel
Headlight Bucket Ring Color Chrome
Headlight Bucket Color Black
Headlight Size 6 1/4"
Light Bulb Color White
Light Bulb Type H4
Light Lens Color Clear
Light Lens Material Glass
Motorcycle Make Honda
Yamaha
Suzuki
Kawasaki
Triumph
BMW
Universal

 
Fit
Quality
Installation
Recommend

Better than OEM and a decent beam pattern

Needed a new headlight to replace the very low output original lamp on my CB200. Fit and finish is almost an exact replica of the original lamp, although the mounting holes are threaded. Plenty of room inside the housing for all the wiring. I put in an HID unit into it but i had to mount the ballast outside. No problem. Great output and great beam pattern.

Good size, plenty of space inside

This light was a good size to downsize from my 8" stocker, my factory harness connecter plugged right in to the light (1980 Suzuki), and I was happy to see so much space inside the bucket to stuff all of the excess wire slack from my front controls into. The opening in the bottom of the bucket is large enough to bundle the wires up and feed them inside even after the light is in place.

Great looking

Needed a new light for my CCW Bobber. This light is perfect as its able to fit all the wiring into the headlight bucket housing. I also purchased the separate mounting brackets as orig mounting hardware does not work with this light. Had to make trip to Home-depot for mounting bolts..easily found. Looks great and now that's its Dark, ill check out the light!

Very happy!

I had a cracked bucket on my stock light, figured if I was going to replace it I may as well get the headlight as well. For less than $50, this was a great bargain, especially since OEM replacement buckets for my 78 Suzuki GS 400 run North of $80 without a headlight. It installed quickly, is MUCH brighter than the factory lamp and doesn't draw more juice off my charging system than the stock one did, VERY happy!

Worked out well

I have a 1978 Kawaski KZ400B. I unbolted the original light bucket, wiggeled out the many wires and connectors inside, pushed them in the new light housing, and attached this new bucket to the original brackets using the original bolts and 5,each 3/8 inch washers as spacers on each side of the bucket. The charging system seems to keep up with the power demand of this light, But i cannot quote the running voltage as i have not measured it. Further, i did not look at the bulb that came with it to identify if it is halogen, or what the wattage is. It is noticeably brighter than OEM, but more would be good. I notice the inprovement on dark roads. Roads with street lights, the inmprovement is more suttle. The original electric socket plugged onto the new bulb.

Perfect fit

I received this when I got home from work yesterday and immediately got started changing out the stock headlight (which is extremely dim) on my 1975 KZ400. It was a great fit, just added some rubber bushings I had laying around.

I love that it maintains the original look of the bike. And, it is bright enough that I can comfortably ride at night.

Fit
Quality
Installation
Recommend

Bitchin lamp!!!

This thing is slick! Im not your A typical wrencher but I am changing my stock rectangle lamp (86 Yamaha Radian) for this beauty... It looks so good mocked up I can't wait to have a go this weekend.

Now if I can figure out the size bolts I need to mount it I'll be good to go! Haha!

Write Your Own Review

You're reviewing: 6-1/4" Gloss Black H4 Headlight Assembly

How do you rate this product? *

 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Fit
Quality
Installation
Recommend