Free Shipping - US orders over $100. Canada over $199. See details.

Motorcycle Seats & Frame Parts

Seats & Frame Parts

Shop our selection of Motorcycle Seats and Frame Parts for Modern Classic and Vintage Motorcycles.

Items 1-20 of 168 totals

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Set Ascending Direction

Grid List

  1. DCC Originals DIY Custom Rear Tail Hoop for Large CC Bikes
    $79.00

    Color/Finish: Raw SteelFits:Large CC Honda's, Kawasaki's, Yamaha's and Suzuki's Harley Davidson Sportser 04+Other Makes & Models w/ Center to Center Tube Measurement of 8" - 8-1/8"Material: 1" or 7/8", DOM Steel TubingDimensions:End to Radius 7" w/ 4" on center 180 Degree RadiusInstallation Notes: Depending upon where you cut your frame and where you cut the tail upon receipt you may need to open or close the gap a bit. This can be done easily by putting one end of the tail in a vice, locking it down, and using a longer piece of steel to pull, or open the gap.In the same respect you can close the gap by simply putting a ratchet strap around the ends tightening it in order to get the fitment spot on with your frame.â–º Make sure you pickup a set of universal frame slugs to ensure a SAFE installation. Learn More
  2. DCC Originals DIY Custom Rear Tail Hoop for Small CC Bikes
    $69.00

    Color/Finish: Raw SteelFits: Small CC Honda's, Kawasaki's, Suzuki's and Yamaha's Harley Davidson Sportser 04+Other Makes & Models w/ Center to Center Tube Measurement of 7" - 7-1/4"Material: 1" or 7/8", DOM Steel TubingDimensions: End to Radius 7" w/ 3.5" on center 180 Degree RadiusInstallation Notes: Depending upon where you cut your frame and where you cut the tail upon receipt you may need to open or close the gap a bit. This can be done easily by putting one end of the tail in a vice, locking it down, and using a longer piece of steel to pull, or open the gap.In the same respect you can close the gap by simply putting a ratchet strap around the ends tightening it in order to get the fitment spot on with your frame.â–º Make sure you pickup a set of universal frame slugs to ensure a SAFE installation. Learn More
  3. Brown DCC Originals Upswept Leather Wrapped "Brat" Seat
    $214.95

    Color/Finish: Brown

    Dimensions: 24" Long x 7-3/4" Wide at Tank Base x 8" Wide at Rear Section x 1-1/2" Thick - Front Mounting Points Move from 2 1/2" to 4-1/2". Rear Mounting Points move 2 3/4" to 5-3/4" Apart. The mounting bolts have the ability to slide from side to side. Distance Apart from Front to Rear mounting bolts are 8”

    Fits: Universal

    Material: Naugahyde, Urethane Foam & Steel base

    *Can be used with both our Small CC and Large CC rear tail loops, shown in photos with a 1/2" reveal on the Large CC and flush fitment on the Small CC. If you're looking for an flat seat just look to your right and checkout SKU #: DCC-BRAT-F-BRWN.

    Learn More
  4. DCC Originals Custom DIY Cafe Racer or Brat Top Hoop Kit - STRAIGHT
    $249.00

    Color/Finish: Raw Steel Fits: Universal Material: SteelKit Includes: 1 - Main Top Loop, 27" Long1 - Secondary Top Loop, 10" Long4 - Universal Frame Slugs2 - Universal Shock Mounts1 - 3/16" Steel Plate (For Making Shock Mount Plates)2 - Pre-bent Universal Front Gussets2 - Pre-bent Universal Side/Rear Gussets Upswept Option Here Learn More
  5. Universal Cafe Racer Seat Mounting Kit
    $74.95

    Color/Finish: Color Varies Fits: 3/4 - 7/8" Frame Rails Material: Fiberglass & Plastic SKU: LM-MOUNTKIT *The clamping blocks and hardware may be purchased separately, please see SKU #: LM-BLOCKSHW. **Check out the full install guide here! Learn More
  6. DCC Originals Custom DIY Weld-On Frame Slugs
    $14.95

    Color/Finish: Raw Steel Fits: Universal Material: SteelDimensions: 1" Long, .075" OD x .900 OD (Suitable for .095" Wall DOM Tubing & Most Frame Tubes)SKU: DCC-100SL*The .075" portion fits perfectly inside .095" DOM steel tubing (what we use on all our products) and the other side at .900" fits most frames as-is but can be ground down as shown to fit smaller ID tubing.**Sold as a pair. Learn More
  7. The DCC Originals DIY Universal Shock Eye Mounts
    $24.95

    Color/Finish: Raw Steel Fits: Universal Material: SteelDimensions: 3" Total Length x 1" OD, 3/4" Long Shock Mounting Area w/ 17/32" OD (13.5mm) & 6MM Threaded Center*Stainless steel button heads and washers included, sold as a set. Learn More
  8. Black Brass Seat Smooth Cushion
    $149.95

    Color/Finish: Black

    Dimensions: N/A

    Fits: "Brass" Cafe Racer Seat Pan

    Material: Aluminum, Foam, & Naugahyde

    *Seat sold separately. See SKU# SP1413-BRASS

    Learn More
  9. Motone "Big Four" Café Racer Seat
    $119.99

    Ready to be Sanded, Finished and Painted Material: Made of Fiberglass - Easily to trim and modify to fit your needs Dimensions: Overall Length: 28.1" Seat Pan Length: 17.5" Width Front: 7.9" Width at Cowl: 10.4" Cowl Height: 5.5" Learn More
  10. Black DCC Originals Leather Wrapped "Cafe" Seat
    $169.95

    Color/Finish: Black Fits: Universal Material: Naugahyde, Urethane Foam & Fiberglass BaseDimensions: Overall Length: 24-1/2"Front Width: 7-1/2" Rear Width: 9-1/2"Front Mounting Points: 3" to 3-1/2" & 1-3/4" ApartRear Mounting Points: 7-1/2" Learn More
  11. Brass Cafe Racer Seat Pan - Aluminum Alloy
    $299.95

    Color/Finish: Polished Aluminum

    Fits: Universal

    Material: Aluminum Alloy

    Dimensions:

    Width at Tank Base: 6.5"

    Width at Cowl Base: 7.75"

    Tapered Thickness: 2"

    Height at Highest Point: 6.25"

    Length: 26-3/8"

    *Please be sure to check seat dimensions against your build as these seats are slim and intended for a narrow overall profile.

    Learn More
  12. "Phat" Cafe Racer Seat Pan - ABS Plastic
    $124.95

    Color/Finish: Black (Paint Ready)

    Fits: Universal

    Material: ABS Plastic

    Dimensions:

    Width at Tank Base: 8.25"

    Width at Cowl Base: 11.5"

    Thickness: 2"

    Thickness at Highest Point in Cowl: 6.5"

    Thickness at Highest Point in Cowl: 26.25"

    Learn More
  13. Brown DCC Originals Flat Leather Wrapped "Brat" Seat
    $199.95

    Color/Finish: Brown

    Dimensions: 24" Long x 7-3/4" Wide at Tank Base x 8" Wide at Rear Section x 1-1/2" Thick - Front Mounting Points Move from 2 1/2" to 4-1/2". Rear Mounting Points move 2 3/4" to 5-3/4" Apart. The mounting bolts have the ability to slide from side to side. Distance Apart from Front to Rear mounting bolts are 8”

    Fits: Universal

    Material: Naugahyde, Urethane Foam & Steel base

    *Can be used with both our Small CC and Large CC rear tail loops, shown in photos with a 1/2" reveal on the Large CC and flush fitment on the Small CC. If you're looking for an up-swept style seat just look to your right and checkout SKU #: DCC-BRAT-UP-BRWN

    Learn More
  14. "Trackster" Cafe Racer ABS Plastic Seat Pan with Low Profile Seat Cushion

    Starting at: $109.95

    View Details

    Color: Black

    Fits: Universal

    Material: Fiberglass Seat Pan

    Self-Skinning Urethane Foam Seat Cushion

    Dimensions:

    Length: 28"

    Width at Tank Base: 7-1/4"

    Width at Widest Point: 10-1/4"

    Height: 6-1/2"

    Learn More
  15. DCC Originals Naked Leather Cafe Seat - Tuck n' Roll - Stallone Bogey Brown
    $349.95

    Color/Finish: Stallone Bogey Brown Fits: Universal Material: Natural Cow Hide Leather Dimensions: Overall Length: 24" Front Width: 7-1/4" Rear Width: 9-3/4" Front Mounting Points: 1.5" to 5" & 3" Apart Rear Mounting Points: 7-1/2" apart NOTE: These seats are made from natural cow hide leather, so each seat will be unique. That's right, no one else will ever have an identical seat to yours. How's that for custom? The tanning and dying process is consistent but the grain and pattern of the leather will be unique to the animal they came from, and may include awesome bits of character like branding or scars from battles and barbed wire. Learn More
  16. The DCC Originals DIY Universal Shock Mount - Clevis
    $9.95

    Color/Finish: Raw Steel

    Fits: Universal

    Material: Steel

    Dimensions:

    Outside Width: 31mm

    Inside Width: 22.6mm

    Height: 36mm

    Width (front to back): 25.4mm / 1"

    Hole Diameter: 10mm

    *Sold as individuals.

    Learn More
  17. Thruxton Cafe Racer Seat Pan - ABS Plastic
    $99.95

    Color/Finish: Color Varies

    Fits: Universal

    Material: ABS Plastic

    Dimensions:

    Width at Tank Base: 8-5/8"

    Width at Cowl Base: 10-1/8"

    Tapered Thickness: 1"

    Thickness at Highest Point: 5.5"

    Length: 26.25"

    Learn More
  18. Black Brass Tuck and Roll Seat
    $179.95

    Color/Finish: Black

    Dimensions: N/A

    Fits: "Brass" Cafe Racer Seat Pan

    Material: Aluminum, Foam, & Naugahyde

    *Seat Pan sold separately. see AKU: SP1413-Brass

    Learn More
  19. Universal Cafe Racer Seat Mounting Blocks & Hardware
    $56.95

    Color/Finish: Color Varies Fits: 3/4 - 7/8" Frame Rails Material: Fiberglass & Plastic Dimensions: N/A SKU: LM-BLOCKHW *This SKU does NOT include the mounting plate shown in the photo's, for a complete kit please see SKU #: LM-MOUNTKIT Learn More
  20. Black Biltwell Diamond Stitched Solo Seat
    $119.95

    Color/Finish: BlackDimensions: Mounting Studs 7-3/8" Spread, Exterior 15" Long x 11-1/2" Wide, See ImagesFits: UniversalMaterial: Leather, Stamped Steel & Composite FoamSKU: SS-VIN-00-BD Learn More

Items 1-20 of 168 totals

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Set Ascending Direction

Grid List