Air Tee - Carburetor - CBX - Pkg 2

Through a special arrangement - we are now the exclusive North American outlet for these exquisite reproduction CBX air tees from Arnold Korn of Germany. 

If you're doing a Concours quality CBX carb restoration you will probably need these air tees! These are frequently deteriorated and sporadically available from Honda. They are an item that sharp show judges will look for!

These venting tees are located between carbs #2 / #3 and between carbs #4 / #5.

Installation Notes:

• The normal installation method is to install these air tees when the carbs are split apart for major service. But it is not absolutely necessary to split the carbs. If you are careful they will pop on with seal picks and appropriate lubrication. You just curl one side of the tee on then carefully pop the other side on. Excellent lighting and a fair amount of patience is advised. Special thanks to Tony MacNeill (sixofsix) for reminding me of this detail.
• You may also need the 2 straight air joints as well. These are also part of Honda's Joint Set D (OEM# 16036-422-004). These are NOT included with our reproduction air tees. They can easily be fashioned from suitably-sized 15mm long sections of fuel hose.  These straight air joints are located between carbs #1 / #2 and between carbs #5 / #6.