Performance Tuning Kit - Carburetors - Scott Turner - VM30 - CB350 - CL350

Scott Turner is a champion Daytona winning vintage racer who pilots several Hondas including, his favorite, the CB350. Over the years of racing and tuning he's found the perfect combination for his mildly modified street Cafes which he builds with usually a stock to one-over piston setup, pod filters and mega-phone exhaust.

This drop in kit will change out the guts of any Mikuni VM30 and will work perfectly taking out the guess work! So long as everything else is setup properly you should easily be able to kick to bike with it starting even before you're through the full stroke kick stroke!

Take a note though, if you have a heavily modified open exhaust or velocity stacks and depending on your relative sea level height and temperature, you may need to pick up some other jets on the lean and rich end to ensure perfect tuning.

Setup:

• Two each of the following:
• 150 main jet
• 3.0 slide
• P-0 needle jet
• 2.0 air
• 50 pilot
• 6F4 needle
• Needle Clip (not shown in pictures)